The HALO Home Smart Recessed Downlight RL56 is a complete LED Baffle-Trim Module for 5" and 6" recessed housings. Control these lights with all of the features of HALO Home Smart Lighting System: wireless ON/OFF, dimming to 5%, and white tuning (2700K-5000K) along with more advanced features like Groups, Scenes, Schedules, Timers and more. Install the free mobile app on a smartphone/tablet to pair and wirelessly control these lights via secure Bluetooth connection. While compatible with standard ON/OFF switches, install HALO Home Controllers for optimal performance. Controllers provide HALO Home Smart Lights constant power enabling them to strengthen and extend your HALO Home mesh network by repeating system commands and respond to commands from any Controller, including smartphones. White - RL56069BLE40AWH (Do not use in combination with non-HALO Home dimmers)
|
|
|
|
|
|
---|---|---|---|---|---|
RL56069BLE40AWH
|
LED | Recessed | 120V | 10 W | Spec |
Install these Smart Lights on the Accessory Dimmer or Scene Keypad. This will provide them with constant power so they can receive wireless commands from any HALO Home Controller, including the mobile App.
No. These need to be installed on HALO Home Controllers or can work with a standard ON/OFF switch.
Yes. While our Smart Lights and Smart Light Adapter prefer constant power, they can be operated by standard ON/OFF switches.
Typically 600 Lumen downlights are installed at 8 or 9-foot ceilings. For higher installation, consider the Lumen Select Smart Recessed Downlights.
Yes. Just install the optional HALO Home Bridge to enable voice control with Amazon Alexa or Google Assistant and remote access.
No. Once these lights are paired into your account and commissioned you can use HALO Home Controllers to wireless control ON/OFF/Dimming (or use standard ON/OFF switches).
If you need to reset HALO Home Smart Lights, try removing them from the app first. If that does not work, then: Power cycle them 4 times: OFF for 2 second + ON for 5 seconds. After a successful reset, the light will blink once and then dim down to 5% at 3000K to indicate being unclaimed. It will blink twice on subsequent power cycling until it is claimed with the app.
Powering on one room/area at a time will make commissioning much easier. Use circuit breakers and/or air-gap switches to limit the number of products. Find the complete installation guide at support.BringHaloHome.com.